Buy the Monobath Developer and Archival Wash along with a Brand New Ultrafine Tank and Reel Outfit set up and you are well on your way to developing your own film in minutes.
1 - Ultrafine MONOBATH Black and White Liquid Developer - 1 Liter
1 - Ultrafine Liquid Archival Wash - 1 quart, to make 11 gals
1 - Ultrafine Plastic Universal Tank with Two Reels
Ultrafine MONOBATH Black and White Liquid Developer - 1 Liter
The Ultrafine MONOBATH Black and White Developer is a ready to use (not a concentrate) liquid developer/stop bath/fixer that develops and fixes all in one shot and is reusable to boot. You can process around 16 rolls with each bottle. Each time you re-use allow around an additional 15 seconds of development time for every re-use. When in doubt, over process a little as this allows the film to "clear" with the repeated use.
Developing for 3.5 minutes at 75°F (Fahrenheit) is an optimal starting point. This is a single step process, do not dilute. You can adjust development as you experiment to your own preferences. For example if you go to 68°F, the recommended development time is 5.5 Minutes. This is considered an archival process as long as you properly wash your film for 20 -25 minute post development. You can drastically reduce your wash time by utilizing an Ultrafine Archival Wash type product to your rinse. Due to the abbreviated development times agitation is recommended, around every 8 - 10 seconds. This product like many of our fun offerings lends itself to experimentation and creative utilization. Enjoy!
Ultrafine Liquid Archival Wash - 1 quart, to make 11 gals
Reusable, all-in-one solution,l NOT a concentrate - Ready to use (or re-use)
A one quart bottle will make 11 gallons of working solution.
Ultrafine Archival Wash can save you around 90% of normal wash water requirements
Archival Wash is non-corrosive and is formaldehyde free.
Ultrafine Plastic Universal Tank with Two Reels
Film developing Tanks Universal plastic daylight tank with two auto load reels for 35mm or 120 size.
The Ultrafine Universal Developing Tank is designed for the processing of black & white or color film, including reversal films that require a second exposure during processing.
The tank body is manufactured from impact-resistant plastic compounds, is resistant to heat and watertight.
Supplied with 2 self-feed multi-format spiral reels, allowing for the simultaneous developing of 2 x 135mm or 126 films or one roll of 127, 120 or 220 format.
Chemical solution requirements molded into base of the tank body.