Ultrafine C-41 EZ16 Color Processing Kit 1 L by Flic Film - Process 16 Rolls
Description
This EZ 16 1 Lt Kit is equivalent to the common 2 Liter Kits
Using a tried and true lab formula these kits use 40% less chemicals than other formulas and have the same capacity of current kits. The 500ml kit is rated for 8 rolls of film, the 1 litre kit is rated for 16 rolls of film. The kits have a developer, stop bath, bleach, fixer and stabilizer. The separated bleach and fixer keeps the chemicals lasting longer and provides consistent results from first roll to last. The very popular bleach bypass process is easy (EZ) with these kits.
Less chemicals for a lower carbon footprint!
C-41 PROCESSING FOR 1 LITER KIT
WARNING: This kit contains chemicals that may be harmful if misused, keep out of the reach of children
Equipment required:
Timer, thermometer, processing tank or processor, 5 1 liter chemical containers, graduate cylinder, microfiber cloth, water bath, gloves, mask and eye protection.
MIXING CHEMICALS:
Use distilled water for all mixing.
DEVELOPER: Mix package into 800ml of water heated to 45 degrees C (113F). Stir until dissolved, then fill to make 1 liter.
STOP BATH: Add ½ of container (15ml) to 800ml of water, then fill to make 1 liter
BLEACH: Mix package into 800ml of water heated to 38 degrees (100F). Stir until dissolved, then fill to make 1 liter.
FIXER: Add room temperature water to fixer to make 1 liter.
STABILIZER: Add to 1 liter of room temperature water.
DEVELOPING: For inversion processing - Warm Developer, Stop Bath, Bleach and Fixer to 39C/102F.
For Jobo or machine processing - Warm Developer, Stop Bath, Bleach and Fixer to 38C/
Each chemical can be re-used until the capacity of 16 rolls is reached. Stop bath is good for 8 rolls, then mix second batch with remaining 15ml.
DEVELOPER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes and 30 seconds have elapsed.
For Jobo or machine processing – 3 minutes
STOP BATH: Add stop bath, invert once and let stand for 30 seconds.
RINSE: Exchange water three times.
BLEACH: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed.
RINSE: Exchange water three times.
FIXER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 2 minutes 30 seconds have elapsed.
RINSE: Exchange water for 5 minutes.
STABILIZER: Soak in stabilizer for 1 minute at room temperature
Hang film to dry in a dust free location.
Stopper all bottles and store at room temperature.
Less chemicals for a lower carbon footprint!
C-41 PROCESSING FOR 1 LITER KIT
WARNING: This kit contains chemicals that may be harmful if misused, keep out of the reach of children
Equipment required:
Timer, thermometer, processing tank or processor, 5 1 liter chemical containers, graduate cylinder, microfiber cloth, water bath, gloves, mask and eye protection.
MIXING CHEMICALS:
Use distilled water for all mixing.
DEVELOPER: Mix package into 800ml of water heated to 45 degrees C (113F). Stir until dissolved, then fill to make 1 liter.
STOP BATH: Add ½ of container (15ml) to 800ml of water, then fill to make 1 liter
BLEACH: Mix package into 800ml of water heated to 38 degrees (100F). Stir until dissolved, then fill to make 1 liter.
FIXER: Add room temperature water to fixer to make 1 liter.
STABILIZER: Add to 1 liter of room temperature water.
DEVELOPING: For inversion processing - Warm Developer, Stop Bath, Bleach and Fixer to 39C/102F.
For Jobo or machine processing - Warm Developer, Stop Bath, Bleach and Fixer to 38C/
Each chemical can be re-used until the capacity of 16 rolls is reached. Stop bath is good for 8 rolls, then mix second batch with remaining 15ml.
DEVELOPER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes and 30 seconds have elapsed.
For Jobo or machine processing – 3 minutes
STOP BATH: Add stop bath, invert once and let stand for 30 seconds.
RINSE: Exchange water three times.
BLEACH: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed.
RINSE: Exchange water three times.
FIXER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 2 minutes 30 seconds have elapsed.
RINSE: Exchange water for 5 minutes.
STABILIZER: Soak in stabilizer for 1 minute at room temperature
Hang film to dry in a dust free location.
Stopper all bottles and store at room temperature.