Ultrafine C-41 EZ8 Color Processing Kit 500ML by Flic Film - Process 8 Rolls
Description
This EZ 8 .5 Lt Kit is equivalent to the common 1 Liter Kits
High Efficiency Kit. Using a tried and true lab formula these kits use 40% less chemicals than other formulas and have the same capacity of current kits. The 500ml kit is rated for 8 rolls of film, the 1 litre kit is rated for 16 rolls of film. Our kits have a developer, stop bath, bleach, fixer and stabilizer. The separated bleach and fixer keeps the chemicals lasting longer and provides consistent results from first roll to last. The very popular bleach bypass process is easy (EZ) with these kits.
Less chemicals for a lower carbon footprint!
C-41 PROCESSING FOR 8 ROLL KIT
WARNING: This kit contains chemicals that may be harmful if misused, keep out of the reach of children
Equipment required:
Timer, thermometer, processing tank or processor, 5 - chemical containers, graduate cylinder, microfiber cloth, water bath, gloves, mask and eye protection. MIXING CHEMICALS:
Use distilled water for all mixing.
PLEASE NOTE, IF PREPARING FOR USE FOR TWO ROLLS OF 35MM IN A PATERSON /AP /UltrafineTANK,
MAKE 580ML OF SOLUTION. ALL OTHER USES USE 500ML.
DEVELOPER: Mix packages A+B into 400ml of water heated to 45 degrees C (113F). Stir until dissolved, then fill to make 500ml-580ml
STOP BATH: Add water to make 500ml-580ml
BLEACH: Mix package into 400ml of water heated to 38 degrees (100F). Stir until dissolved, then fill to make 500ml-580ml
FIXER: Add room temperature water to fixer to make 500ml-580ml
STABILIZER: Add to 500ml-580ml of room temperature water.
DEVELOPING: For inversion processing - Warm Developer, Stop Bath, Bleach and Fixer to 39C/102F. For Jobo or machine processing - Warm Developer, Stop Bath, Bleach and Fixer to 38C/100F Each chemical can be re-used until the capacity of 8 rolls is reached.
DEVELOPER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes and 30 seconds have elapsed.
(4 minutes and 15 seconds for 580ml) For Jobo or machine processing – 3 minutes
STOP BATH: Add stop bath, invert once and let stand for 30 seconds.
RINSE: Exchange water three times.
BLEACH: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed. (3 minutes 40 seconds for 580ml)
RINSE: Exchange water three times.
FIXER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 2 minutes 30 seconds have elapsed. (3 minutes for 580ml)
RINSE: Exchange water for 5 minutes.
STABILIZER: Soak in stabilizer for 1 minute at room temperature
Hang film to dry in a dust free location.
Stopper all bottles and store at room temperature.
Less chemicals for a lower carbon footprint!
C-41 PROCESSING FOR 8 ROLL KIT
WARNING: This kit contains chemicals that may be harmful if misused, keep out of the reach of children
Equipment required:
Timer, thermometer, processing tank or processor, 5 - chemical containers, graduate cylinder, microfiber cloth, water bath, gloves, mask and eye protection. MIXING CHEMICALS:
Use distilled water for all mixing.
PLEASE NOTE, IF PREPARING FOR USE FOR TWO ROLLS OF 35MM IN A PATERSON /AP /UltrafineTANK,
MAKE 580ML OF SOLUTION. ALL OTHER USES USE 500ML.
DEVELOPER: Mix packages A+B into 400ml of water heated to 45 degrees C (113F). Stir until dissolved, then fill to make 500ml-580ml
STOP BATH: Add water to make 500ml-580ml
BLEACH: Mix package into 400ml of water heated to 38 degrees (100F). Stir until dissolved, then fill to make 500ml-580ml
FIXER: Add room temperature water to fixer to make 500ml-580ml
STABILIZER: Add to 500ml-580ml of room temperature water.
DEVELOPING: For inversion processing - Warm Developer, Stop Bath, Bleach and Fixer to 39C/102F. For Jobo or machine processing - Warm Developer, Stop Bath, Bleach and Fixer to 38C/100F Each chemical can be re-used until the capacity of 8 rolls is reached.
DEVELOPER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes and 30 seconds have elapsed.
(4 minutes and 15 seconds for 580ml) For Jobo or machine processing – 3 minutes
STOP BATH: Add stop bath, invert once and let stand for 30 seconds.
RINSE: Exchange water three times.
BLEACH: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed. (3 minutes 40 seconds for 580ml)
RINSE: Exchange water three times.
FIXER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 2 minutes 30 seconds have elapsed. (3 minutes for 580ml)
RINSE: Exchange water for 5 minutes.
STABILIZER: Soak in stabilizer for 1 minute at room temperature
Hang film to dry in a dust free location.
Stopper all bottles and store at room temperature.